MAF/IAT Sensor: Removal
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the electrical connector of the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor. See Figure. Remove the MAF/IAT sensor screws from the upper housing of the air cleaner assembly. Remove the MAF/IAT sensor.