LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 409 (Engine Controls - Removal & Installation - Diesel) >> Sensors & Switches >> MAF/IAT Sensor >> Installation

MAF/IAT Sensor: Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the MAF/IAT sensor. Install the MAF/IAT sensor screws and tighten to specification. See TORQUE SPECIFICATIONS . Connect the MAF/IAT sensor electrical connector.

Fig 1: Locating Mass Air Flow/Intake Air Temperature Sensor
G00079461Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals