Crankshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Lubricate the "O" ring on the sensor with clean engine oil. Install the CKP sensor. Install the CKP sensor bolt and tighten to specification. See TORQUE SPECIFICATIONS . Connect the CKP sensor electrical connector. Connect the negative battery cables. Tighten battery cable bolts to specification.