Conditions For Running DTC
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0141, P0201-P0208, P0410, P0440, P0442, P0443, P0446, P0449, P1415, P1416, or P1441 are not set.
- The system voltage is 9-18 volts.
- The HO2S BANK 1 SENSOR 2 VOLTAGE parameter is within 100 mV of the bias voltage at start-up.
- The LOOP STATUS parameter is closed.
- The ENGINE RUN TIME parameter is over 3 minutes.
- The TP SENSOR parameter has changed by more than 5 percent at least twice.