Removal (Front)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Remove the I/P insulator. Disconnect the electrical connector from the air temperature actuator.
Remove the air temperature actuator retaining screws. See Fig 1. Remove the air temperature actuator. See Fig 2.

Fig 1: Removing & Installing Air Temperature Actuator Retaining Screws

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Air Temperature Actuator

Courtesy of GENERAL MOTORS CORP.