EVAP Canister Purge Solenoid: Removal
WARNING: This page is about a different car, the 2003 Pontiac Bonneville, 2003 Buick Park Avenue, and 2003 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition. Remove fuel injector sight shield (upper engine cover) from engine. Disconnect the EVAP canister purge solenoid harness connector. See Figure or Figure .
- Disconnect the EVAP canister purge solenoid purge pipe and vacuum supply hose. Release the retaining tab on the EVAP canister purge mounting bracket and remove the EVAP canister purge solenoid. Inspect for carbon release exiting the EVAP canister purge solenoid. See EVAP SYSTEM CLEANING .