EVAP Canister Purge Solenoid: Installation

WARNING: This page is about a different car, the 2003 Pontiac Bonneville, 2003 Buick Park Avenue, and 2003 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Install the EVAP canister purge solenoid onto the EVAP canister purge solenoid mounting bracket. Connect the EVAP canister purge valve purge pipe and vacuum supply hose. Connect the EVAP canister purge valve harness connector. Install the fuel injector sight shield.

Fig 1: Locating EVAP Purge Solenoid (VIN K)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Locating EVAP Purge Solenoid (VIN 1)

Courtesy of GENERAL MOTORS CORP.