Removal & Installation
WARNING: This page is about a different car, the 2003 Pontiac Bonneville, 2003 Buick Park Avenue, and 2003 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
The EVAP canister is located underneath rear of vehicle. See Fig 1. Raise and support vehicle. Note location and disconnect hoses from EVAP canister. Remove EVAP canister bracket attaching nuts. Remove the EVAP canister bracket and canister. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS .