Knock Sensors: Installation
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Install the knock sensor. Install the knock sensor bolt and tighten the bolt to specification. See TORQUE SPECIFICATIONS . Connect the knock sensor electrical connector. Install the distributor. See DISTRIBUTOR under IGNITION SYSTEMS.
Install the knock sensors. Tighten sensors to specification. See TORQUE SPECIFICATIONS . Push down on the rubber covers. Install the intake manifold. See INTAKE MANIFOLD UNDER AIR INDUCTION SYSTEMS.