Removal (4.3L)
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The EVAP canister purge solenoid may also be referred to as an EVAP canister purge valve.
- Remove the air cleaner outlet resonator duct. See AIR CLEANER RESONATOR OUTLET DUCT under AIR INDUCTION SYSTEMS.
- The EVAP canister purge solenoid is located on top right center of engine. Disconnect EVAP purge pipe from EVAP canister purge solenoid. See Figure. Disconnect EVAP canister purge solenoid. harness connector.
- Remove EVAP canister purge solenoid retaining nuts. Remove engine wiring harness bracket from EVAP canister purge solenoid mounting stud. Remove EVAP canister purge solenoid.