LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 387 (Engine Controls - Removal & Installation - Flex Fuel & Gasoline) >> Emission Systems & Sub-Systems >> EVAP Canister >> Installation

EVAP Canister: Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EVAP canister. Install the EVAP canister nuts and tighten the nuts to specification. See TORQUE SPECIFICATIONS .
  2. Lower the vehicle. Connect the EVAP vent valve pipe to the EVAP canister. Connect the fuel feed/return and EVAP pipe assembly to the EVAP canister. Connect the fuel tank EVAP pipe to the EVAP canister.


  1. Install the EVAP canister to the bracket. Install the EVAP pipe to the EVAP canister, and retaining clip. Install the EVAP canister. Install the EVAP canister bracket bolt and tighten bolt to specification. See TORQUE SPECIFICATIONS .
  2. Connect the EVAP vent valve pipe to the EVAP canister. Connect the fuel tank EVAP pipe to the EVAP canister. Connect EVAP purge pipe at fitting near side of EVAP canister. Lower the vehicle.
scientia non olet · About LEMON Manuals