LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 387 (Engine Controls - Removal & Installation - Flex Fuel & Gasoline) >> Air Induction Systems >> Air Cleaner Assembly >> Removal (4.3L)

Removal (4.3L)

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor electrical connector.
  2. Loosen the air cleaner outlet resonator clamp at the MAF/IAT sensor and separate the outlet resonator from the MAT/IAT sensor.
  3. Remove the air cleaner assembly by pulling upward until the mounting studs are free from the grommets.