LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 385 (Engine Controls Self-Diagnostics) >> Diagnostic Tests >> DTC P0103: MAF Sensor Circuit - High Frequency >> Test Description

Test Description

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers in the diagnostic procedures.

  1. 3

    This step tests for Electromagnetic Interference (EMI) on the signal circuit of the MAF sensor. A frequency reading with the MAF sensor disconnected indicates an EMI related fault or a poor connection. Disconnecting the MAF sensor may set additional related DTCs.

  2. 4

    This step will determine if incorrect harness routing has caused this DTC to set.

  3. 5

    This step will determine if water intrusion has caused this DTC to set.

scientia non olet · About LEMON Manuals