LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Engine Controls Self-Diagnostics - 3.1L Engine) >> Diagnostic Tests >> DTC P1336: Crankshaft Position System Variation Not Learned >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix, 2003 Chevrolet Malibu, and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform diagnostic system check - engine controls. See DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM. After performing diagnostic system check - engine controls, go to next step.
  2. Perform the CKP system variation learn procedure. Is the action complete? If yes, go to next step. If no, go to DIAGNOSTIC AIDS .
  3. Using scan tool, clear DTCs. Turn ignition switch to OFF position for 30 seconds. Start the engine. Operate vehicle within Conditions For Running Test. See CONDITIONS FOR RUNNING TEST . Did the DTC fail this ignition? If yes, go to step  2. If no, go to next step.
  4. Using the scan tool, observe the stored information in CAPTURE INFO. Does scan tool display any DTCs that you have not diagnosed? If yes, see DIAGNOSTIC TROUBLE CODE DEFINITIONS . If no, system is okay at this time.
scientia non olet · About LEMON Manuals