Test Description
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix, 2003 Chevrolet Malibu, and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers in the diagnostic procedure.
- 5 - This step will determine if the MAP sensor pressure is within the proper range for a given altitude.
- 6 - This step will determine if the MAP sensor voltage is within the proper range at idle.
- 7 - This step will determine if the MAP sensor responds properly to the change in manifold pressure.
- 8 - This step will determine if the TP sensor is operating properly.
- 9 - This step will determine if any mechanical faults have caused this DTC to set.