DTC P0336: Crankshaft Position Sensor Circuit Performance: Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Sonoma, 2003 GMC Safari, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
The Crankshaft Position (CKP) sensor signal indicates the crankshaft speed and position. The CKP sensor is connected directly to the Powertrain Control Module (PCM), and consists of the following circuits:
- The 12-volt reference circuit.
- The low reference circuit.
- The CKP sensor signal circuit.
If PCM detects that the CKP sensor signal is incorrect for 3 seconds, DTC P0336 sets.