LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 376 (Rear Suspension System) >> Removal & Installation >> Stabilizer Shaft & Insulators (15/25 Series) >> Removal

Stabilizer Shaft & Insulators (15/25 Series): Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the stabilizer shaft link nut from the ball stud. See Figure and Figure .
  3. Remove the stabilizer shaft insulator bracket mounting bolts. See Fig 1 .
  4. Remove the stabilizer shaft.
  5. Remove the stabilizer shaft insulator brackets.
  6. Remove the stabilizer shaft insulators.
Fig 1: Removing & Installing Stabilizer Shaft & Insulators (15/25 Series)
G00136218Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals