Spring Bumper: Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: spring bumper may also be referred to as jounce bumper.

NOTE: On 15 series utility models, spring bumper is a snap-fit component. It is replaced by prying from its mounting and snapping its replacement into position.

Raise and support the vehicle. Spring bumper is located on bottom of frame rail directly above rear axle housing.
On all except 15 series utilities, remove the spring bumper mounting bolt. Remove spring bumper. On 15 series utility models, unsnap and remove spring bumper.