LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 376 (Rear Suspension System) >> Removal & Installation >> Spring Bumper >> Installation

Spring Bumper: Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spring bumper into position.
  2. On all except 15 series utilities, install the spring bumper bolt and tighten to specification. See TORQUE SPECIFICATIONS  . On 15 series utility models, snap spring bumper into position.
  3. Remove the safety stands.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals