DTC P0446: EVAP Vent Valve Control Circuit: Description
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
A restricted or blocked Evaporative (EVAP) emission vent path is detected by the Powertrain Control Module (PCM) commanding the purge valve ON (open) and the vent valve ON (closed) allowing a vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the PCM commands the purge valve OFF (closed) and the vent valve OFF (open) while monitoring the Fuel Tank Pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to about zero in. H2O in a calibrated time, DTC P0446 will set.