LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Rear Suspension System) >> Removal & Installation >> Trailing Arm >> Installation

Trailing Arm: Installation

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the trailing arm to the trailing arm bracket. See Figure.
  2. Install the bolt and nut to the trailing arm and the trailing arm bracket. Tighten the bolt to 77 Ft. Lbs. (105 N.m).
  3. Install the trailing arm to the knuckle.
  4. Install the bolt and nut to the trailing arm and the knuckle. Tighten the nut to 52 Ft. Lbs. (70 N.m) plus 65 degrees.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals