LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Rear Suspension System) >> Removal & Installation >> Stabilizer Shaft >> Installation (Insulator)

Installation (Insulator)

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulator to the stabilizer shaft. See Figure.
  2. Install the stabilizer shaft insulator bracket.
  3. Install the stabilizer shaft bracket nuts. Tighten the bolts to 35 Ft. Lbs. (48 N.m).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals