LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 369 (Engine Controls - Removal & Installation) >> Fuel Systems >> Fuel Pressure Regulator >> Removal

Fuel Pressure Regulator: Removal

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. The fuel pressure regulator is located on end of fuel rail. See Figure . Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  .
  2. Disconnect the fuel pressure regulator vacuum line. Remove the fuel pressure regulator retaining screw. Using a shop towel to catch any spilled fuel, lift and twist the fuel pressure regulator in order to remove the fuel pressure regulator from the fuel rail.
  3. Remove the retainer and spacer bracket from the rail and discard. Remove the fuel pressure regulator from the engine fuel return pipe. Remove the fuel pressure regulator inlet "O" ring and discard.
scientia non olet · About LEMON Manuals