Removal & Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
EVAP canister is mounted to the fuel tank. See Figure . Remove the fuel tank. See FUEL TANK under FUEL SYSTEMS. Remove the 2 retaining nuts connecting the EVAP canister bracket to the fuel tank. Reposition the EVAP canister and disconnect the EVAP system hoses/pipes from the EVAP canister. Remove the EVAP canister from the EVAP canister bracket. To install, reverse removal procedure.