EGR Valve: Removal
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the EGR valve electrical connector. See Fig 1 . Remove the air cleaner assembly. See AIR CLEANER ASSEMBLY under AIR INDUCTION SYSTEMS. Remove the transaxle fluid filler tube. Remove the bolt retaining the pipe assembly from the EGR valve and carefully pull the pipe assembly back.
- Remove the EGR valve retaining bolts. Remove the EGR valve assembly. Remove the gasket. Clean the EGR valve mating surface.