LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Engine Controls - Removal & Installation) >> Sensors >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Drain the coolant system below the level of the Engine Coolant Temperature (ECT) sensor. See Figure . Disconnect the ECT sensor electrical connector. Carefully remove the ECT sensor.