Air Cleaner Intake Duct: Installation
WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Combine the air cleaner intake duct and the MAF/IAT sensor. Install the air cleaner intake and the MAF/IAT assembly on the throttle body and on the air cleaner cover. Inspect for proper alignment of the air cleaner intake and MAF/IAT assembly and tighten the hose clamps. Tighten the air cleaner intake, MAF/IAT assembly and throttle body clamps to specification. See TORQUE SPECIFICATIONS . Connect the MAF/IAT sensor electrical connector.