LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Repair Instructions >> Engine Mount Strut Bracket Replacement - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the right engine mount strut bracket over the pin locator.
  2. Install the bolts through the right engine mount strut bracket to the cylinder head.

    Tighten: 

    Tighten the engine mount strut bracket bolt to 50 N.m (37 ft lbs) 

    Fig 1: Right Engine Mount Strut Bracket And Bolts
    G01763527Courtesy of GENERAL MOTORS CORP.
  3. Install the air conditioner compressor. Refer to COMPRESSOR .

    Tighten: 

    Tighten the air conditioning compressor mounting bolts to 50 N.m (37 ft lbs) 

  4. Install the right engine mount strut to the right engine mount strut bracket. Refer to Engine Mount Strut Replacement .
scientia non olet · About LEMON Manuals