LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt tension by lifting or rotating the drive belt tensioner off of the drive belt, using a 3/8-inch breaker bar (1).
    Fig 1: Untensioning Drive Belt
    G01763495Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt.
    Fig 2: Removing The Drive Belt
    G01763496Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals