LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Description and Operation >> Rotating the Engine for Service Access

Rotating the Engine for Service Access

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required: J 41131  Engine Tilt Strap

  1. Remove the air cleaner intake duct. Refer to AIR CLEANER INTAKE DUCT REPLACEMENT in ENGINE CONTROLS - REMOVAL & INSTALLATION, OVERHAUL .
  2. Apply the parking brake.
  3. Put the transaxle in the Neutral position.
  4. Remove the engine mount strut bolts. Swing the engine mount struts aside. Refer to Engine Mount Strut Bracket Replacement - Left  or Engine Mount Strut Bracket Replacement - Right  .
  5. Install the J 41131.
  6. Rotate the engine forward for component access.