With Feedback Fuel System
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve the fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove the fuel tank filler pipe cap. Drain the fuel through the fuel tank filler pipe using a hand or air operated fuel pump device and a hose which has a 0.5" (13 mm) or smaller diameter in order to prevent the drain hose from getting stuck inside the fuel tank filler neck pipe check valve.
- Remove the driveline support assembly. See appropriate DIFFERENTIAL & DRIVELINE article in DRIVELINE/AXLES.
- Remove the crossover tube/hose from the right fuel tank. See FUEL TANK CROSSOVER TUBE . Drain the fuel through the fuel tank crossover connection using a hand or air operated fuel pump device and the appropriate hose.