Clutch Actuator Cylinder: Installation
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Excessive amounts of lubricant on the input shaft splines can contaminate the clutch disc and cause clutch shudder.
- Lightly lubricate the inside diameter of the bearing with input shaft Lubricant (21005995). Install the clutch actuator cylinder bolts and tighten to specification. See TORQUE SPECIFICATIONS .
- Install the transaxle assembly. See TRANSAXLE ASSEMBLY . Connect the clutch master cylinder line to the transaxle by pushing it in until it seats.
- Bleed the clutch hydraulic system. See BLEEDING . Lower vehicle. Road test vehicle to check clutch for proper operation.