LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Automatic Transmission Removal & Installation) >> Removal & Installation >> Transmission Support >> Removal

Transmission Support: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
  2. Support the transmission with a safety stand.
  3. Remove the brake combination valve-to-transmission support mounting bolt. See Fig 1 .
  4. Remove the fuel filter bracket-to-transmission support retaining bolts. See Fig 2 .
  5. Remove the transmission mount-to-transmission support retaining nut. See Fig 3 or Fig 4 .
  6. Remove the transmission support-to-frame mounting bolts. See Fig 5 .
  7. Remove the transmission support from the vehicle.
Fig 1: Removing/Installing Brake Combination Valve-To-Transmission Support Mounting Bolt
G00207879Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Fuel Filter Bracket Bolts
G00207880Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing/Installing Transmission Mount-To-Transmission Support Retaining Nut (RWD)
G00207881Courtesy of GENERAL MOTORS CORP.
Fig 4: Removing/Installing Transmission Mount-To-Transmission Support Retaining Nuts (4WD)
G00207882Courtesy of GENERAL MOTORS CORP.
Fig 5: Removing/Installing Transmission Support-To-Frame Mounting Bolts
G00207883Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals