Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Install the "O" ring seal (3) on the vehicle speed sensor (1). Coat the "O" ring seal (3) with a thin film of transmission fluid. Install the vehicle speed sensor (1) into the transmission case. See Figure . Install and tighten the bolt to specification. See TORQUE SPECIFICATIONS . Connect the wiring harness electrical connector to the vehicle speed sensor. Fill transmission with appropriate fluid to proper level. See LUBRICATION .