LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Automatic Transmission Servicing) >> Removal & Installation >> Transmission Support >> Installation

Transmission Support: Installation

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission support to the frame.
  2. Install the upper transmission support-to-frame mounting bolts. See Figure . Tighten the upper transmission support-to-frame mounting bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the lower transmission support-to-frame mounting bolts. See Figure . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  4. Lower the transmission onto the transmission support.
  5. Install the transmission mount-to-transmission support retaining nuts. See Figure . Tighten the transmission mount-to-transmission support retaining nuts to specification. See TORQUE SPECIFICATIONS  .
  6. Install the EVAP canister.
  7. Install the fuel tank shield.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals