Incorrect PCM Programming
WARNING: This page is about a different car, the 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- There are only a few situations when reprogramming a PCM is appropriate, such as the following:
- A new service PCM is installed.
- A PCM from another vehicle is installed.
- Revised software or calibration files have been released for this vehicle.
- Verify that the PCM contains the correct software or calibration. If incorrect programming is found, reprogram the PCM with the most current software or calibration. See PROGRAMMING in SELF-DIAGNOSTICS - 2.2L ALERO, CAVALIER, GRAND AM & SUNFIRE - GASOLINE article.
NOTE:
DO NOT re-program the PCM with the SAME software or calibration files that are already present in the PCM. This is not an effective repair for any type of driveability problem.