Driven Sprocket Support Assembly
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
Insert 2 case cover bolts into driven sprocket support assembly. See Fig 1. Grasp bolts and lift support assembly. Remove thrust washer from 2nd clutch housing. Washer may be stuck to support assembly.