LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transaxle Overhaul & Testing - 4T65-E) >> Transaxle Disassembly >> Accumulator Assembly & 2-1 Manual Band Servo

Accumulator Assembly & 2-1 Manual Band Servo

WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accumulator cover bolts from 1-2 and 2-3 accumulator cover. See Fig 1. Remove bolts from 2-1 manual band servo cover. Using screwdriver, gently pry lube oil pipe retainer from case. See Fig 2. Remove lube oil pipe from front differential carrier internal gear lube hole. See Fig 3.
  2. Remove 1-2 and 2-3 accumulator assembly and 2-1 manual band servo assembly together. Remove pipe assembly. DO NOT twist pipe assembly. Remove cover gasket from 2-1 manual band servo.
Fig 1: Removing & Installing Accumulator & 2-1 Manual Band Covers
G98J01966Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Lube Oil Pipe Retainer
G00057602Courtesy of GENERAL MOTORS CORP.
Fig 3: Exploded View Of Accumulator Components & 2-1 Manual Band Servo
G98B01967Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals