LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transaxle Overhaul & Testing - 4T65-E) >> Transaxle Disassembly >> 1-2 Support Drum & Forward Band

1-2 Support Drum & Forward Band

WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.

Install Support Remover/Installer (J-38358) onto 1-2 support drum assembly. Lift remover/installer with 1-2 support drum out of case. See Fig 1. Tilt band to disengage band from anchor pin. Remove forward band from case. See Fig 2.

Fig 1: Removing & Installing 1-2 Support Drum
G00073308Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Forward Band & Thrust Washer
G00057624Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals