LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transaxle Overhaul & Testing - 4T65-E) >> Component Disassembly & Reassembly >> Reverse Reaction Drum >> Inspection

Reverse Reaction Drum: Inspection

WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: This step has been revised due to ATRA TSB No. 579, dated November 2000.
  1. Inspect for damaged 2nd clutch and reverse reaction drum splines. Original 2nd clutch and reverse reaction drums have splines with 25-degree sides and have tendency to strip. New design 2nd clutch and reverse reaction drum kit (GM P/N 24213402) have splines with 10-degree sides.
  2. Inspect reverse reaction drum for cracks, damaged splines or distortion. See Figure. Replace drum if necessary.