Input Clutch Housing & Sprag Clutches: Reassembly
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
Using small screwdriver, align teeth of input clutch plate assembly with 3rd clutch plate assembly. Ensure sprag assembly is fully seated into housing. Insert combined input sprag clutch and 3rd sprag clutch assembly into input clutch housing assembly. See Figure.