LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Transaxle Oil Cooler Line Assembly >> Removal

Transaxle Oil Cooler Line Assembly: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place drain pan or suitable container under vehicle.
  2. Clean the cooler line connection points at the radiator and transaxle.
  3. Remove transaxle oil cooler lines from radiator.
  4. Raise and support vehicle.
  5. Remove transaxle cooler line assembly nut from transaxle. See Fig 1 .
  6. Remove transaxle oil cooler lines from vehicle.
Fig 1: Removing & Installing Transaxle Cooler Lines
G00078071Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals