LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Console >> Installation

Removal & Installation: Console: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the console on top of the center floor console. See Figure .
  2. Install the console screws. Tighten the screws to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the electrical connector to the auxiliary power outlet. See Figure .
  4. Reposition the center console.
  5. Install the cup holder screws. See Figure . Tighten the screws to specification. See TORQUE SPECIFICATIONS  .
  6. Install the cup holder liner.
  7. Reach under the front seats to access the lower console screws.
  8. Install the center console screws. See Figure . Tighten the screws to specification. See TORQUE SPECIFICATIONS  .
  9. Position the front seat forward to the original position.
scientia non olet · About LEMON Manuals