LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Trouble Shooting >> Body Leans Or Sways In Corners

Body Leans Or Sways In Corners

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Did you review the General Description and perform the necessary inspections? See DESCRIPTION  and VISUAL/PHYSICAL INSPECTION  . Go to next step.
  2. Verify vehicle leans or sways in corners. If vehicle does not operate normally go to next step.
  3. Inspect front and rear coil springs for damage or corrosion. See STRUTS/SHOCK ABSORBER  under ADJUSTMENTS & INSPECTION. Replace as necessary. See STRUT ASSEMBLY  .
  4. Inspect the stabilizer shaft link for wear or damage.
  5. Replace coil springs and stabilizer shaft link if necessary. See STRUT ASSEMBLY  and STABILIZER BAR  .
  6. Road test vehicle to verify system repair. If condition is still present, go to step  2 .