Stabilizer Bar: Removal
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Raise vehicle and support by frame. Remove front wheels. Remove left and right stabilizer link bolts. Remove left and right stabilizer bar brackets. See Figure . Separate left tie rod end from steering knuckle using Universal Steering Linkage Puller (J-24319-B). Remove lower exhaust pipe. Turn left strut to right against stop. Slide stabilizer bar outboard over left steering knuckle until right end is free, remove stabilizer bar out center of vehicle.