LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Adjustments & Inspection >> Wheel Bearing

Wheel Bearing

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Mount and secure the Dial Indicator (J-8001) to a stand. Ensure that the Dial Indicator (J-8001) contacts the vertical surface of the wheel as close as possible to the top wheel stud.
  2. Push and pull on the TOP of the tire. Inspect the total movement indicated by the Dial Indicator (J-8001). If the measurement exceeds 0.127 mm (0.005 in), replace the wheel bearing/hub. See HUB & BEARING ASSEMBLY 
scientia non olet · About LEMON Manuals