Removal & Installation: Transmission: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. If equipped with drive shaft parking brake, adjust parking brake. See DRIVE SHAFT PARKING BRAKE under ADJUSTMENTS. On 4WD models, install NEW transmission adapter gasket.
On all models, lightly coat input shaft splines with high-temperature grease. Tighten bolts to specifications. See TORQUE SPECIFICATIONS . Fill transmission and transfer case (if equipped) with appropriate lubricant to proper level. See SERVICING - M/T article in MANUAL TRANSMISSIONS.