Clutch Assembly & Pilot Bearing: Inspection
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all components with water-dampened cloth to remove asbestos fibers. Clean flywheel housing with solvent. Release bearing is permanently packed with lubricant and should not be cleaned with solvent.
- Inspect all components for wear or damage. Inspect all contact surfaces for scoring, warping and damage. Inspect friction surfaces for excessive oil. Inspect splines for nicks, burrs and sliding fit.