HVAC Control Assembly: Removal
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Remove the instrument panel (I/P) accessory trim plate. See TRIM PLATE REPLACEMENT - I/P ACCESSORY in ACCESSORIES & EQUIPMENT. Remove the front floor console trim plate and floor console. See Figure-Figure . Remove the retaining screws from the HVAC control assembly. See Figure. Pull the HVAC control assembly out from the I/P. Disconnect the electrical connectors and the vacuum harness, if equipped, from the HVAC control assembly. See Figure. Remove the HVAC control assembly.