A/C Pressure Sensor: Installation

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Install the new O-ring seal. Install the A/C refrigerant pressure sensor to the condenser tube. Tighten the sensor to specification. See TORQUE SPECIFICATIONS . Connect the A/C refrigerant pressure sensor to the electrical connector. Install the air cleaner assembly. Evacuate and recharge A/C system.

Fig 1: Locating A/C Pressure Sensor

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing A/C Pressure Sensor

Courtesy of GENERAL MOTORS CORP.